From: Michael Lestinsky (michael_at_zaphod.rhein-neckar.de)
Date: 15. Nov 1999
Hallo allezusammen,
Ich habe mir heute ein 100MBit Hub und entsprechende Karten geleistet.
Nun stehe ich vor dem Problem, dass das Ding nicht will:
Der Hub zeigt mir von beiden Rechnern einen Link an. Von magrathea
(Openbsd 2.5, DEC21143) aus kann ich Pingen, bekomme aber von zaphod
(Debian 2.1, SIS900) keine Antwort.
Von Zaphod aus kann ich das eigene Device (eth1) anpingen, aber nicht
das Netz. Sieht jemand den Fehler?
zaphod:/lib/modules/2.2.13/net# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=0.2 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=255 time=0.1 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=255 time=0.1 ms
zaphod:/lib/modules/2.2.13/net# ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
ping: sendto: Operation not permitted
ping: wrote 192.168.1.2 64 chars, ret=-1
ping: sendto: Operation not permitted
ping: wrote 192.168.1.2 64 chars, ret=-1
ping: sendto: Operation not permitted
ping: wrote 192.168.1.2 64 chars, ret=-1
ifconfig:
eth1 Link encap:Ethernet HWaddr 00:40:33:E1:95:E7
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Interrupt:11 Base address:0x6700
zaphod:/lib/modules/2.2.13/net# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
dmesg:
[...]
sis900.c:v1.05 8/07/99
eth1: SiS 900 PCI Fast Ethernet at 0x6700, IRQ 11, 00:40:33:e1:95:e7.
eth1: MII transceiver found at address 1.
Bye
Micha-amendeseinerweisheit-el
-- Unix User Group Rhein-Neckar: http://home.pages.de/~uugrn Linux Installparty: 14-16.1.2000 http://home.pages.de/~uugrn/lip.html
Dieses Archiv wurde generiert von hypermail 2.1.2 : 11. Mar 2002 CET