Soundproblem mit SUSE

Autor: Jörg Rappert <Joerg.Rappert_at_gmx.de>
Datum: Tue, 13 Jan 2009 18:38:50 +0100
Hallo Liste,
ich hab jetzt mal die opensuse 11.1-Live-CD ausprobiert. Problem: Kein Sound. Yast meldet: Alles ok.
Im Terminal lspci:command not found. Hardwareinfo durch yast ergibt:
3: udi = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0_alsa_control__1'
  alsa.card_id = 'Audigy 4 [SB0610] (rev.0, serial:0x10211102)'
  linux.subsystem = 'sound'
  info.subsystem = 'sound'
  linux.device_file = '/dev/snd/controlC0'
  info.product = 'Audigy 4 [SB0610] (rev.0, serial:0x10211102) ALSA Control Device'
  info.udi = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0_alsa_control__1'
  info.category = 'alsa'
  info.capabilities = { 'alsa', 'access_control' }
  access_control.file = '/dev/snd/controlC0'
  access_control.type = 'sound'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/sound/card0/controlC0'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  alsa.device_file = '/dev/snd/controlC0'
  info.parent = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0'
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0'
  alsa.card = 0 (0x0)
  alsa.type = 'control'
  linux.hotplug_type = 2 (0x2)

  4: udi = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0_oss_pcm_0'
  oss.device_file = '/dev/dsp'
  linux.subsystem = 'sound'
  info.subsystem = 'sound'
  linux.device_file = '/dev/dsp'
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0'
  info.product = 'ADC Capture/Standard PCM Playback OSS PCM Device'
  oss.card = 0 (0x0)
  info.udi = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0_oss_pcm_0'
  info.category = 'oss'
  oss.card_id = 'Audigy 4 [SB0610] (rev.0, serial:0x10211102)'
  info.capabilities = { 'oss', 'access_control' }
  oss.device_id = 'ADC Capture/Standard PCM Playback'
  access_control.file = '/dev/dsp'
  oss.device = 0 (0x0)
  access_control.type = 'sound'
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/sound/card0/dsp'
  oss.type = 'pcm'
  info.callouts.add = { 'hal-acl-tool --add-device' }
  info.parent = '/org/freedesktop/Hal/devices/pci_1102_8_sound_card_0'
  info.callouts.remove = { 'hal-acl-tool --remove-device' }
  linux.hotplug_type = 2 (0x2)
Kann da jemand helfen?
Grüsse
Jörg Rappert
--
http://mailman.uugrn.org/mailman/listinfo/uugrn
Wiki: http://wiki.uugrn.org/wiki/UUGRN:Mailingliste
Archiv: http://lists.uugrn.org/
Empfangen am 13.01.2009

Dieses Archiv wurde generiert von hypermail 2.2.0 : 13.01.2009 CET