Sorry wenn ich mich jetzt melde, aber es steht dick im Text, warum es
nicht geht:
------------------------
cdrecord-prodvd: This version of cdrecord limits DVD-R/DVD-RW support to
-dummy or 1 GB real.
cdrecord-prodvd: If you need full DVD-R/DVD-RW support, ask the Author
for cdrecord-ProDVD.
cdrecord-prodvd: Free test versions and free keys for personal use are
at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
------------------------
Also, Software registrieren, dann sollte gehen.
Alexander
Stefan Fuhrmann schrieb:
> Ich hab mir cdrecord-ProDVD runtergeladen in der Hoffnung das es damit
> funktioniert und habs damit probiert, geht aber auch nicht:
> *Code:*
>
> node1:~# cdrecord-prodvd -v -sao speed=2 -force dev=1,0,0
> /home/stef/sarge-i386-1.iso
> Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C)
> 1995-2004 Jörg Schilling
> Unlocked features:
> Limited features:
> TOC Type: 1 = CD-ROM
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> Linux sg driver version: 3.1.25
> Using libscg version 'schily-0.8'.
> SCSI buffer size: 64512
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : '_NEC '
> Identifikation : 'DVD_RW ND-3500AG'
> Revision : '2.18'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: DVD+R
> Profile: Unknown
> Profile: DVD+R (current)
> Profile: DVD+RW
> Profile: DVD-RW sequential overwrite
> Profile: DVD-RW restricted overwrite
> Profile: DVD-R sequential recording
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> cdrecord-prodvd: This version of cdrecord limits DVD-R/DVD-RW support to
> -dummy or 1 GB real.
> cdrecord-prodvd: If you need full DVD-R/DVD-RW support, ask the Author
> for cdrecord-ProDVD.
> cdrecord-prodvd: Free test versions and free keys for personal use are
> at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
> Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
> Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: SAO
> Drive buf size : 1769472 = 1728 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 4452 MB
> Total size: 4452 MB = 2279644 sectors
> Current Secsize: 2048
> cdrecord-prodvd: Cannot init drive.
> node1:~#
>
>
>
> Ich hab da gelesen das es ohne key scheinbar auch nur 1GB schreibt. Hab
> also eine mail geschrieben um den Key zu erhalten, hab aber bis jetzt
> kein response. Oder liegt es an etwas anderem??
> Der output sagt ja es wäre nur dvd+r , ich finde aber keine Möglichkeit
> auf +w zu schalten.
>
> und versucht habe ich:
>
> *Code:*
>
> node1:~# cdrecord-prodvd dev=ATAPI1,0,0 -v /dev/home/stef/sarge-i386-1.iso
> cdrecord-prodvd: No write mode specified.
> cdrecord-prodvd: Asuming -tao mode.
> cdrecord-prodvd: Future versions of cdrecord may have different drive
> dependent defaults.
> cdrecord-prodvd: Continuing in 5 seconds...
> Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C)
> 1995-2004 Jörg Schilling
> Unlocked features:
> Limited features:
> TOC Type: 1 = CD-ROM
> cdrecord-prodvd: Invalid argument. Invalid bus or target specifier in
> 'ATAPI1,0,0'. Cannot open SCSI driver.
> cdrecord-prodvd: For possible targets try 'cdrecord -scanbus'. Make sure
> you are root.
> cdrecord-prodvd: For possible transport specifiers try 'cdrecord dev=help'.
> node1:~# cdrecord-prodvd dev=ATAPI:1,0,0 -v /dev/home/stef/sarge-i386-1.iso
> cdrecord-prodvd: No write mode specified.
> cdrecord-prodvd: Asuming -tao mode.
> cdrecord-prodvd: Future versions of cdrecord may have different drive
> dependent defaults.
> cdrecord-prodvd: Continuing in 5 seconds...
> Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C)
> 1995-2004 Jörg Schilling
> Unlocked features:
> Limited features:
> TOC Type: 1 = CD-ROM
> scsidev: 'ATAPI:1,0,0'
> devname: 'ATAPI'
> scsibus: 1 target: 0 lun: 0
> Warning: Using ATA Packet interface.
> Warning: The related libscg interface code is in pre alpha.
> Warning: There may be fatal problems.
> cdrecord-prodvd: ERROR: unknow subsystem (scd0) in (/dev/sr0)
> Using libscg version 'schily-0.8'.
> SCSI buffer size: 64512
> atapi: -1
> cdrecord-prodvd: Cannot do inquiry for CD/DVD-Recorder.
> cdrecord-prodvd: Input/output error. test unit ready: scsi sendcmd:
> fatal error
> CDB: 00 00 00 00 00 00
> cmd finished after 0.000s timeout 40s
>
>
>
> weiß dazu jemand noch was??
>
> danke und
> mit internettem Gruß
>
> Stefan
>
>
Received on Tue Feb 8 22:04:33 2005