Ich hab mir cdrecord-ProDVD runtergeladen in der Hoffnung das es damit
funktioniert und habs damit probiert, geht aber auch nicht:
*Code:*
node1:~# cdrecord-prodvd -v -sao speed=2 -force dev=1,0,0
/home/stef/sarge-i386-1.iso
Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-3500AG'
Revision : '2.18'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+R
Profile: Unknown
Profile: DVD+R (current)
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
cdrecord-prodvd: This version of cdrecord limits DVD-R/DVD-RW support to
-dummy or 1 GB real.
cdrecord-prodvd: If you need full DVD-R/DVD-RW support, ask the Author
for cdrecord-ProDVD.
cdrecord-prodvd: Free test versions and free keys for personal use are
at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: SAO
Drive buf size : 1769472 = 1728 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4452 MB
Total size: 4452 MB = 2279644 sectors
Current Secsize: 2048
cdrecord-prodvd: Cannot init drive.
node1:~#
Ich hab da gelesen das es ohne key scheinbar auch nur 1GB schreibt. Hab
also eine mail geschrieben um den Key zu erhalten, hab aber bis jetzt
kein response. Oder liegt es an etwas anderem??
Der output sagt ja es wäre nur dvd+r , ich finde aber keine Möglichkeit
auf +w zu schalten.
und versucht habe ich:
*Code:*
node1:~# cdrecord-prodvd dev=ATAPI1,0,0 -v /dev/home/stef/sarge-i386-1.iso
cdrecord-prodvd: No write mode specified.
cdrecord-prodvd: Asuming -tao mode.
cdrecord-prodvd: Future versions of cdrecord may have different drive
dependent defaults.
cdrecord-prodvd: Continuing in 5 seconds...
Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
cdrecord-prodvd: Invalid argument. Invalid bus or target specifier in
'ATAPI1,0,0'. Cannot open SCSI driver.
cdrecord-prodvd: For possible targets try 'cdrecord -scanbus'. Make sure
you are root.
cdrecord-prodvd: For possible transport specifiers try 'cdrecord dev=help'.
node1:~# cdrecord-prodvd dev=ATAPI:1,0,0 -v /dev/home/stef/sarge-i386-1.iso
cdrecord-prodvd: No write mode specified.
cdrecord-prodvd: Asuming -tao mode.
cdrecord-prodvd: Future versions of cdrecord may have different drive
dependent defaults.
cdrecord-prodvd: Continuing in 5 seconds...
Cdrecord-ProDVD-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:1,0,0'
devname: 'ATAPI'
scsibus: 1 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
cdrecord-prodvd: ERROR: unknow subsystem (scd0) in (/dev/sr0)
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: -1
cdrecord-prodvd: Cannot do inquiry for CD/DVD-Recorder.
cdrecord-prodvd: Input/output error. test unit ready: scsi sendcmd:
fatal error
CDB: 00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
weiß dazu jemand noch was??
danke und
mit internettem Gruß
Stefan
Received on Tue Feb 8 20:52:45 2005