FreeBSD: cdrecord erkennt TEAC-Brenner nicht am SCSI-Bus

Datumsansicht Baumansicht Betreffansicht Attachement-Sicht

Autor: Raphael H. Becker (Raphael.Becker_at_gmx.de)
Datum: 31. Mar 2003


Hi Liste,

ich bin etwas ratlos:

laut Kernelmessages existiert ein Brenner in meinem Syststem, hängt am
Adptec-Controller, er hat die SCSI-ID 6.

aus dmesg:

[snip]
FreeBSD 4.8-RC #1: Sun Mar 30 17:35:15 CEST 2003
    root_at_daemon.local.net:/usr/obj/usr/src/sys/DAEMON
[snip]
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xd800-0xd8ff mem 0xdfeff000-0xdfefffff irq 15 at device 1.0 on pci2
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[snip]
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da2 at ahc0 bus 0 target 5 lun 0
da2: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34502LW 0004> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34502LW 0004> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 6 lun 0
cd1: <TEAC CD-R55S 1.0L> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present

Leider ist cdrecord der Meinung, alles außer dem Brenner zu finden:

# cdrecord -scanbus
Cdrecord 2.0 (i386-unknown-freebsd4.8) Copyright (C) 1995-2002 Jörg Schilling
Using libscg version 'schily-0.7'
scsibus0:
        0,0,0 0) 'SEAGATE ' 'ST34502LW ' '0004' Disk
        0,1,0 1) 'SEAGATE ' 'ST34502LW ' '0004' Disk
        0,2,0 2) *
        0,3,0 3) 'PLEXTOR ' 'CD-ROM PX-32TS ' '1.03' Removable CD-ROM
        0,4,0 4) *
        0,5,0 5) 'IOMEGA ' 'ZIP 100 ' 'J.03' Removable Disk
        0,6,0 6) *
        0,7,0 7) *

Wieso das? Weiß jemand Rat?

Gruß
Raphael Becker


Datumsansicht Baumansicht Betreffansicht Attachement-Sicht

Dieses Archiv wurde generiert von hypermail 2.1.4 : 31. Mar 2003 CEST