FW: Symbios Logic 810 SCSI Controller

Datumsansicht	Baumansicht	Betreffansicht	Attachement-Sicht

From: Marco Lorig (mlorig_at_gmx.net)
Date: 29. Aug 2000

Nächste Nachricht: Christian Weisgerber: "Re: FW: Symbios Logic 810 SCSI Controller"
Vorherige Nachricht: Jochen Lillich: "LinuxBBS -> LinuxDE"
Nächste im Thread: Christian Weisgerber: "Re: FW: Symbios Logic 810 SCSI Controller"
Antwort: Christian Weisgerber: "Re: FW: Symbios Logic 810 SCSI Controller"

Hi Liste,

ich wollte vorhin diesen Controller unter linux benutzen.
Nach Kernelbau (2.2.13) habe ich neu gebootet.

Während des bootens findet er den SCSI Controller. Allerdings mit Fehlern:

ncr53c810a-0-<1,0>: phase change 2-6 6_at_00faae45 resid=5.
ncr53c810a-0:1: ERROR (0:4) (8-0-0) (0/3) @ (script 370:c1000000).
ncr53c810a-0: script cmd = 800c0006
ncr53c810a-0: regdump: da 00 80 03 47 00 01 1f 01 08 07 00 80 00 0e 02.
ncr53c810a-0: have to clear fifos.
ncr53c810a-0: unexpected disconnect
ncr53c810a-0: SCSI parity error detected: SCR1=138 DBC=c1000000 SSTAT1=e
ncr53c810a-0-<1,0>: COMMAND FAILED (8a ff) @c7fccd40.
ncr53c810a-0-<1,0>: phase change 2-6 6_at_00faae45 resid=5.
ncr53c810a-0:1: ERROR (0:4) (8-0-0) (0/3) @ (script 370:c1000000).
ncr53c810a-0: script cmd = 800c0006
ncr53c810a-0: regdump: da 00 80 03 47 00 01 1f 01 08 07 00 80 00 0e 02.
ncr53c810a-0: have to clear fifos.
ncr53c810a-0: unexpected disconnect
ncr53c810a-0: SCSI parity error detected: SCR1=138 DBC=c1000000 SSTAT1=e
ncr53c810a-0-<1,0>: COMMAND FAILED (8a ff) @c7fccd40.
scsi2 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 2 channel 0.
ncr53c8xx_reset: pid=47 reset_flags=1 serial_number=0
serial_number_at_timeout=0
scsi2: device driver called scsi_done() for a syncronous reset.
ncr53c810a-0: restart (scsi reset).
ncr53c810a-0-<1,0>: phase change 2-6 6_at_00faae45 resid=5.
ncr53c810a-0:1: ERROR (0:4) (8-0-0) (0/3) @ (script 370:c1000000).
ncr53c810a-0: script cmd = 800c0006
ncr53c810a-0: regdump: da 00 80 03 47 00 01 1f 01 08 07 00 80 00 0e 02.
ncr53c810a-0: have to clear fifos.
ncr53c810a-0: unexpected disconnect
ncr53c810a-0: SCSI parity error detected: SCR1=138 DBC=c1000000 SSTAT1=e
ncr53c810a-0-<1,0>: COMMAND FAILED (8a ff) @c7fccd40.
ncr53c810a-0-<1,0>: phase change 2-6 6_at_00faae45 resid=5.
ncr53c810a-0:1: ERROR (0:4) (8-0-0) (0/3) @ (script 370:c1000000).
ncr53c810a-0: script cmd = 800c0006
ncr53c810a-0: regdump: da 00 80 03 47 00 01 1f 01 08 07 00 80 00 0e 02.
ncr53c810a-0: have to clear fifos.
ncr53c810a-0: unexpected disconnect
ncr53c810a-0: SCSI parity error detected: SCR1=138 DBC=c1000000 SSTAT1=e
ncr53c810a-0-<1,0>: COMMAND FAILED (8a ff) @c7fccd40.
ncr53c810a-0-<1,0>: phase change 2-6 6_at_00faae45 resid=5.
ncr53c810a-0:1: ERROR (0:4) (8-0-0) (0/3) @ (script 370:c1000000).
ncr53c810a-0: script cmd = 800c0006
ncr53c810a-0: regdump: da 00 80 03 47 00 01 1f 01 08 07 00 80 00 0e 02.
ncr53c810a-0: have to clear fifos.
ncr53c810a-0: unexpected disconnect
ncr53c810a-0: SCSI parity error detected: SCR1=138 DBC=c1000000 SSTAT1=e
ncr53c810a-0-<1,0>: COMMAND FAILED (8a ff) @c7fccd40.

Was bedeutet das?

Regards

Marco

Nächste Nachricht: Christian Weisgerber: "Re: FW: Symbios Logic 810 SCSI Controller"
Vorherige Nachricht: Jochen Lillich: "LinuxBBS -> LinuxDE"
Nächste im Thread: Christian Weisgerber: "Re: FW: Symbios Logic 810 SCSI Controller"
Antwort: Christian Weisgerber: "Re: FW: Symbios Logic 810 SCSI Controller"

Datumsansicht	Baumansicht	Betreffansicht	Attachement-Sicht

Dieses Archiv wurde generiert von hypermail 2.1.2 : 11. Mar 2002 CET